Getting started

Risolino turns your drawings and photos into something that looks like a riso print. If it's your first go, follow a walkthrough. Come back to the settings when you want to know what a slider actually does.

Walkthroughs

  • Graphic print Chunky shapes and one big word, overprinted until the inks run into each other.
  • Mushroom print A mushroom, from a reference photo to a finished print: two drawings, a phone scan and a few minutes in Risolino.

Settings

Every control in Risolino, grouped by what it changes. The defaults already make a good print, so change one thing at a time and see what happens. Each control has a Start with note: where to begin, and when it's worth changing.

  • Page The buttons under the preview, for zooming in, re-rolling the misalignment and downloading the print.
  • Paper The sheet you print on: its size and colour, and how your layers sit on it.
  • Ink How the ink behaves: how much it spreads, how it prints lighter tones, how badly the passes line up and how the colours mix.
  • Layers The controls on each layer, and how to move layers into place.

Graphic print

Chunky shapes and one big word, overprinted until the inks run into each other. All you need is a thick marker, your phone and a font you like. You don't have to be able to draw.

The finished print: the word Riso in blackletter, in blue and green, over overlapping pink, orange and yellow blobs

01 Fill a sheet with shapes

Draw blobby shapes with a thick black marker, like a Sharpie, and colour them in solid. Leave gaps of white between them. The gaps are where the other layers show through.

Scan it with your phone. On an iPhone, open Notes or Files and choose Scan Documents.

A scanned sheet of solid black marker blobs arranged in a rough oval

02 Duplicate it and rotate the copy

One drawing can give you several layers. In Photos, open the scan, tap the More button and choose Duplicate, then rotate the copy with Edit → Crop → Rotate. Turned round, the same shapes land somewhere new and cross the originals in ways you wouldn't plan.

Want a third layer? Rotate another copy by a different amount, or flip it.

The original scan of marker blobs
The scan.
The same scan rotated 180 degrees, so the blobs sit in different places
A copy, rotated 180°.

03 Set a word in a font

Open a font on Google Fonts, type your word into the preview box and turn the size right up. This one is Grenze Gotisch. Take a screenshot of the word, black on white.

Crop the screenshot to the same shape as your scan so the layers line up. If the scan is portrait and you want the word to run along the long edge, turn the screenshot on its side, then turn the finished print back at the end.

The word Riso in black blackletter on white

04 Overprint the lot

Open Risolino and drop in the shapes, the rotated copy and the word together. Give the shapes light, bright inks. Put the word at the top of the layer list in a dark ink, so it reads over everything.

For the doubled lettering on the cover, add the word twice in two inks. Then use Compose to nudge one copy a little, so the two look like passes that didn't quite line up.

Download the print, and rotate the PNG back if you worked on its side.

The finished print: Riso in blue and green blackletter over overlapping pink, orange and yellow blobs

Try it with these

Grab the shapes scan and the word, make a rotated copy of the shapes, and drop them all into Risolino.

Mushroom print

A mushroom, from a reference photo to a finished print: two drawings, a phone scan and a few minutes in Risolino. A riso prints one ink at a time, so you draw one sheet for each colour.

The finished print: an orange-capped mushroom in crimson line over a yellow texture of tangled twigs

01 Find a reference

Anything with clear shapes works. This one's a russula from a walk in the woods: a red cap, white gills and stem, and a lot of leaf litter that won't make the drawing.

Photo of a red-capped mushroom with white gills and stem among brown fallen leaves

02 Draw one sheet per ink

Draw everything in black, on plain white paper, one sheet for each colour. You choose the colours later. Use the same paper size for each sheet and keep the drawing in the same place on each one. Tracing over the first sheet on a window or light box is the easy way.

How dark you draw sets how heavy the ink is. Solid black prints solid colour, and lighter hatching prints as a lighter tint.

Scanned sheet one: the mushroom's outline, gills and stem texture drawn in black pen
Outline
Scanned sheet two: only the cap shape, filled with dense hatching
Wash

03 Scan them with your phone

On an iPhone, open Notes or Files and choose Scan Documents. Scan the sheets in order, one page each, and save. You get one PDF with a page for each layer. Any scanner works, as long as the background comes out white.

04 Drop the PDF into Risolino

Open Risolino and drag the PDF onto the page. Each page becomes a layer, in grayscale: black is full ink and white is bare paper. Click a layer's colour strip to choose an ink.

Layers print from the bottom of the list up, so drag the handles until the line layer is on top.

05 Add a background

Drop in any photo as a background texture. It's added as another layer and turned to grayscale like the scans, so its shapes print in whatever ink you give it. For a lighter effect, turn on Advanced layer options and lower that layer's opacity.

The print without a background: a red cap and dark blue line on bare cream paper
The background photo: dry twigs, grass and dead leaves on the ground
The print with the background: the same mushroom over a pale lilac twig texture

06 Make it look printed

Most of the character comes from the Setup panel (every setting, explained):

  • Paper size: Smallest layer crops everything to the smallest layer, here the scans, so the photo behind fits the drawing.
  • Paper color: the ink is see-through, so the paper shows through everything. Try a few.
  • Shading: Dot screen gives classic halftone dots, as in these prints, and Grain turns tints into a modern riso stipple.
  • Registration jitter: real passes never quite line up. Hit Re-roll until you like how they've landed.

If a layer needs nudging into place, Compose lets you drag it around and resize it by its corners. Click the preview to look at it at 100%. The zoomed-out view smooths dots too fine for your screen into flat tone, and the detail is where it pays off:

Close-up of the cap rim: orange and crimson halftone dots, with the yellow twig texture below
At 100%: every tint is a field of dots, and each ink sits slightly off the others.

07 Download, then try another

Download saves a full-resolution PNG. The layers stay where they are, so you can swap the inks and the paper and download again.

Try lots of colours. The same three layers give a very different print with each set of inks. Put a dark ink on the line and a light one on the wash, then swap them round. Or keep everything in one family, like pinks over pink. The background ink sets the mood of the whole sheet: yellow feels warm and lilac feels quiet.

An orange cap and crimson line over a yellow twig texture
A yellow-orange cap and hot pink line over a pink twig texture
A magenta and blue cap with the twigs showing through, dark green line, over a turquoise twig texture
A red cap and dark blue line over a pale lilac twig texture

Try it with these

Grab the two scans (PDF) and the background photo, drop them into Risolino, and make your own version. Everything runs in your browser and nothing gets uploaded.

Page

The buttons under the preview, for zooming in, re-rolling the misalignment and downloading the print. They act on the whole print rather than one layer.

Fit and 100%

Fit shows the whole sheet. 100% shows it pixel for pixel, and you can drag to look around. You can also click the preview to switch. The zoomed-out view smooths dots too fine for your screen into flat tone, so look at 100% for the dots themselves.

Start with Fit while you set things up. Check at 100% before you download.

Re-roll

Picks a new random misalignment for every layer. It only shows while Registration jitter is on, and the download uses whichever one you can see.

Start with Re-roll a few times. A small shift changes where colours touch and where paper shows between them.

Download

Saves the print as a full-resolution PNG. It matches the preview exactly, misalignment and all. The button shows the size you'll get.

Paper

The sheet you print on: its size and colour, and how your layers sit on it.

Paper size

How big the sheet is. Largest layer fits the sheet to your biggest layer. Smallest layer crops everything to your smallest one. Zine (A3) and Drawing (A4) are fixed sheets at 300dpi, and OG:Image is 1200×630px for link previews.

Start with Largest layer. Switch to Smallest layer when a photo is bigger than the drawing it sits behind.

Paper color

The colour of the sheet. Riso ink is see-through, so the paper tints every colour printed on it. Click the swatch for a preset, or type a hex code.

Start with Eggshell, the default. Natural and Stone make bright inks look warmer and older.

Scale to paper

Resizes every layer to the sheet. Fit shrinks or grows each layer to fit inside the paper. Fill makes it cover the paper and crops what spills over. Off leaves each layer at its own size.

Start with Off for scans of the same sheet. Try Fit when your layers are different sizes, like a screenshot and a scan.

Margin

Adds bare paper around the artwork, in pixels of the finished image.

Start with 0. Add some when you want a border round the print.

Safe area

Keeps ink off a strip round the edge of the sheet, like the rim a real riso can't print on. Artwork under the strip is hidden, not moved.

Start with 0. Raise it when artwork running off the edge looks too digital.

Ink

How the ink behaves: how much it spreads, how it prints lighter tones, how badly the passes line up and how the colours mix.

Ink spread

Lets ink creep a little past its edges, the way it soaks into real paper. Printers call this dot gain. Spread amount sets how far it goes.

Start with On, at the default amount. It takes the crisp digital edge off without blurring the drawing.

Shading

A riso can only print ink or no ink, so every lighter tone becomes a pattern. Dot screen is classic halftone dots on an angled grid. Grain is a fine scattered stipple, like modern riso output. Gradient keeps tones smooth, which no real riso can do.

With Dot screen, Dot spacing sets the size of the dots. Auto angles gives each layer its own angle, which stops two grids making a shimmering moiré pattern. Turn it off to set one Screen angle yourself. With Grain, Grain size sets how coarse it is.

Start with Dot screen with Auto angles on. Try Grain for photos and soft pencil, where dots can look mechanical.

Registration jitter

Shifts and tilts each layer by a small random amount, because passes through a real riso never line up exactly. Jitter amount is a percentage of the sheet's longer edge. Re-roll, under the preview, picks a new random set.

Start with On, at the default 0.34%. That's about 1mm on an A4 sheet, the drift of a real machine. Re-roll until the misalignment falls somewhere you like.

Ink blending

How inks mix where they overlap. Realistic mixes them like pigment, so blue over yellow makes green. Simple multiplies the colours, weighted by how opaque each ink is. Off treats every ink like coloured film.

With Realistic, Order weight makes lower layers count for slightly more, because the first ink down soaks deepest into the paper.

Start with Realistic, with Order weight at its default.

Layers

The controls on each layer, and how to move layers into place. Click a layer's name to rename it.

Order

Drag a layer by its handle to move it up or down the list. Layers print from the bottom up, so the top layer lands last and sits over everything else.

Start with The darkest ink, usually the line work, at the top.

Colour

Click the colour strip to choose the layer's ink. The palette is based on real riso inks, and each has its own coverage: Black hides what's under it, Yellow barely tints it.

Start with Light, bright inks for big areas and a dark one for detail.

Source

Click the thumbnail to swap in a different image. The layer keeps its ink, its place in the list and its position, so you can redraw a sheet and drop the new scan straight in.

Start with Replace rather than delete when you rescan a drawing.

Delete

The × beside the layer's name removes it. There's no undo, so you'll need to add the image again to get it back.

Compose

The quickest way to line layers up. Hit Compose under the preview and it turns into a light table: every layer becomes a coloured outline with its artwork faintly showing, so you can see how they stack and where the edges fall.

Pick a layer, in the preview or by its dot in the layer list. Drag it to move it, or drag a corner to resize it. Hit Exit compose mode when you're done. The preview stays at Fit while you compose.

Advanced layer options

Turn on Advanced layer options at the bottom of the Layers panel to add three controls to every layer. Turning it off hides them again but keeps what you set. Scale and Offset are the typed version of Compose: drag a layer there and these numbers change with it.

Opacity

How much ink the layer puts down, from 0 to 100%. Lower it to fade a layer back without changing its ink.

Start with 100%. Drop a background photo to around 40–60% so it stays behind the drawing.

Scale

Resizes the layer from 10% to 200% of its size. It applies on top of Scale to paper, so a layer fitted to the sheet can still be made bigger or smaller.

Start with 100%, and resize by eye in Compose.

Offset

Moves the layer from its centred position. X moves it right and Y moves it down, both in pixels of the finished print. Negative numbers go the other way.

Start with 0, 0. Type numbers when you need an exact match, like two copies of a word offset by the same amount.